Water Treatment Plant

Two of the main processes of water treatment  are boiler water treatment and cooling water treatment. Water treatment plant manufacturer & suppliers systems meet a variety of purification and separation needs. They can range from relatively compact and straightforward to complex, multiunit processes that serve a variety of applications. If you’re new to water treatment, you might be asking “What is an water treatment system and how does it work?”

Since water treatment is a complex family of technologies and systems, this article will focus on giving a high-level overview of the technologies that are typically used and summarize how they work, helping you to better understand the best possible solutions for your facility.

What is an Water Treatment Plant system?

An water treatment system treats water so it is more appropriate for a given use, whether for consumption, manufacturing, or even disposal. That said, each system will vary depending on the facility’s needs and many of the technologies that make up these systems can be similar. In general, some of the most-needed water treatment systems typically include:

• Raw water treatment systems
• Boiler feed water treatment systems
• Cooling tower water treatment systems
• Wastewater treatment systems

The technologies selected and in what order they appear in each water treatment system will vary depending on the contaminants that need to be removed, but it is possible to narrow down what you might see in these four common industrial treatment systems. The following is a breakdown of what might be included in a typical water treatment system:

Raw water treatment plant systems

What they are

Raw water is any untreated water that occurs naturally in the environment, including sources such as rainwater, groundwater, wells, lakes, and rivers. In industrial settings, raw water may be used for cooling, rinsing, product formulations, or even human consumption if it is properly purified.

Raw water treatment systems are used for pretreatment and optimization of source water, usually with an eye toward improving production efficiency and process performance for a particular application. Examples include pretreating cooling tower/boiler feed water, process/production water, and/or water for drinking. Often, raw water treatment is focused on protecting downstream equipment from scaling, fouling, corrosion, and other forms of damage or premature wear due to contaminants present in the source water. Raw water treatment systems typically remove suspended/colloidal solids, silica/colloidal silica, iron, bacteria, and hardness.

How they work

Raw water treatment systems are designed around specific treatment goals and applications, therefore, the process may vary from one installation to the next. Nonetheless, the following steps demonstrate how a raw water treatment system will usually work:

Intake

Raw water is drawn into a plant through gravity and/or pumps. The water is usually passed through a metal grate or mesh screen to prevent large objects from entering the system.

Clarification

The water then continues for clarification, which is a multistep process used to remove suspended solids from a solutions. Clarification begins with coagulation, where chemical and/or pH adjustments cause particles to begin clumping together, followed by flocculation, which involves physical agitation to encourage formation of larger particles. Then comes a sedimentation step, where the stream flows to a gravity settler that allows solids to settle to the bottom in what is known as a sludge blanket. Finally, the stream is filtered through a gravity sand filter to trap any small particles that did not settle out.

Disinfection

If biological contamination and/or water potability is a concern, the water may then be disinfected to remove any pathogens. Disinfection may be accomplished through the application of chemical disinfectants (e.g. chlorine), physical disinfectants (e.g. UV or heat), as well as some forms of membrane filtration.

Lime softening

In some cases, a lime softening step may be added to reduce hardness in streams with high mineral or sulfate content. The process involves the application of lime or lime soda to raise the pH of the stream, which in turn encourages mineral constituents to precipitate out of solutions.

Ion exchange (IX)

In some cases, the raw water treatment system may include an IX unit for hardness removal, or other specialized treatment needs. In IX softening, a stream is directed through a strong acid cation resin that is “charged” with sodium; as the water flows through, the resin captures the hardness-causing calcium or magnesium ions, while releasing the sodium ions into the stream.

Distribution

Following treatment, the water is pumped or otherwise routed for use elsewhere in the facility.

Membrane filtration

As microfiltration (MF), ultrafiltration (UF), and nanofiltration (NF) systems have become more affordable in the last few decades, they are increasingly being used in place of conventional technologies such as clarification and lime softening.

Boiler feed Water Treatment Plant systems

What they are

Boiler feed water treatment systems are used to protect boiler unit components and piping from damage due to certain contaminants present in the boiler and/or makeup feeds. These contaminants may include dissolved solids, suspended solids, and organic material, such as iron, copper, silica, calcium, magnesium, aluminum, hardness, and dissolved gases. Without proper treatment, boiler feed water can cause scaling, corrosion, and fouling of the boiler and downstream equipment, which can result in costly plant downtime, expensive maintenance fees, increased fuel consumption and boiler failure.

How they work

An effective boiler feed water treatment system works by both removing harmful impurities prior to entering the boiler as well as controlling the acidity and conductivity of the water. While treatment trains vary, a typical system will consist of primary treatment and possibly polishing depending on the boiler pressure, steam use, and chemistry of the boiler feed and makeup water. A boiler feed water treatment system will typically include some or all of the following steps:

Makeup water intake

As boilers are used, they lose water to steam consumption, loss of condensate return, and leaks. This water must be replaced with what is known as makeup water. Makeup water may be drawn from a treated city supply or a raw water treatment system.

Filtration

The stream is typically filtered through one or more filtration units for removal of sediment, turbidity, and organic material. When used for pretreatment ahead of IX and other equipment, membrane filtration units can be a cost-effective means of preventing fouling and excess maintenance of downstream equipment.

Softening

IX is often used for removing hardness from boiler feed water, including bicarbonates, sulfates, chlorides, and nitrates. This is accomplished by using a softening resin, which is typically a strong acid cation resin that allows it to effectively capture hardness ions from the stream.

Dealkalization

Alkalinity can cause foaming and carryover in boilers, as well as corrosion in piping. Therefore, boiler feed streams are often treated with strong anion IX, or weak acid IX followed by degasification, which serve to remove bicarbonate, sulfate, and nitrate ions, reducing pH.

Reverse osmosis (RO) and nanofiltration (NF)

RO and NF are not always used for boiler feed water treatment, however, they can be useful for removal of bacteria, salts, organics, silica and hardness. RO and NF are both types of membrane filtration, meaning that they employ a semi-permeable membrane to capture any contaminants too large to fit through their pores, while allowing water molecules to flow through.

Primary ion exchange (IX)

For large volumes of water or high pressure boilers, deionizers may be used instead of membrane filtration. IX typically produces water of comparatively higher quality and resistivity, and better yields.

Deaeration or degasification

Following all other treatment steps, the makeup water and condensate from the boiler system are combined and degasified. Deaeration/degasification is the removal of dissolved oxygen and carbon dioxide from the liquid stream, which is important for preventing corrosion.

Polishing

Depending on the boiler requirements, polishing technologies may be required. This step can follow RO or primary IX. Typical polishing technologies include mixed bed deionization (DI), electrodeionization (EDI), or offsite regenerable DI.

Distribution

Following all treatment steps, the boiler feed water is piped to the boiler, where it is heated to form steam. The condensate can then be combined with treated makeup water, and the cycle begins again.

Although these steps represent common boiler feed water system trains, it is important to understand that an individual boiler’s unique makeup/chemistry is an extremely complex calculation that will dictate the technologies needed. We recommend consulting the boiler manufacturer for their water purification specifications. You should also consult a water treatment specialist to conduct a thorough treatability study, which can help determine which combination of these technologies would best suit your boiler.

Cooling tower Water Treatment Plant systems

What they are

Cooling tower water treatment systems are used to protect cooling tower components from damage due to contaminants present in feed water, circulation water, and/or blowdown water. These contaminants may include chlorides, hardness, iron, biological materials, silica, sulfates, TDS, and or TSS. Untreated cooling tower feed water can cause scaling, corrosion, biological growth, and fouling of cooling tower equipment, which can result in costly plant downtime, reduced productivity, and excessive maintenance or equipment replacement costs over time.

How they work

An effective cooling tower water treatment system works by removing harmful impurities in line with the manufacturer recommendations for water quality requirements for the type of cooling tower used. While treatment trains vary depending on the requirements of the cooling tower equipment and chemistry of the feed, makeup, and blowdown water, a typical cooling tower water treatment system will usually include the following steps:

Makeup water intake

As water circulates through a cooling tower system, a portion is lost to evaporation, bleed to drain, and leaks. This water must be replaced with what is known as makeup water. Like boiler makeup water, cooling tower makeup water may be drawn from a variety of sources, whether raw water, municipal water supplies, wells, or recycled plant wastewater. In some cases, source water must also be treated for hardness or silica removal and/or pH adjustment.

Filtration

Upon intake, the stream is typically filtered through one or more filtration units for removal of sediment, turbidity, and organic material. As previously mentioned, when filtration is used for pretreatment ahead of IX and other equipment, it can be a cost-effective means of preventing fouling and excess maintenance of more sensitive downstream equipment.

Softening

If there’s high hardness in the source/makeup water, a softening resin or membrane softener can be used. These contaminants, if present, will otherwise cause scale deposits and rust. Depending on feed water quality, softening can improve the efficiency of cooling tower water use.

Chemical addition

Next, the stream will usually undergo some form of chemical treatment, which can include the application of corrosion inhibitors to neutralize acidity; algaecides or biocides to reduce growth of biological contaminants; and/or scale inhibitors to prevent contaminants from forming scale on pipes and other components.

Side-stream filtration

Many cooling towers are designed to recirculate water following use. If this is the case, a side-stream filtration unit will be helpful in removing any problematic contaminants that have entered through drift contamination, leaks, etc. About 10% of the circulating water will filter through what is usually a high-quality multimedia filtration unit or SAMCO tube filtration technology.

Post-treatment

There are various types of post-treatment options that may be used depending upon plant conditions. If large quantities of water are required for cooling, or if water is scarce at the facility’s location, plants may opt to treat the blowdown water with RO or IX and reuse it. For discharge of blowdown water and/or bleed water, other post-treatment systems may be leveraged to minimize disposal costs or bring the waste stream in line with discharge regulations.

Wastewater Treatment Plant systems

What they are

A wastewater treatment system is used to convert spent streams into an effluent that can either be reused or safely discharged to the environment or municipal treatment facility.

The most appropriate wastewater treatment system will help the facility avoid harming the environment, human health, and a facility’s equipment, process or products (especially if the wastewater is being reused). It will also help the facility curb heavy fines and possible legal action if wastewater is being improperly discharged to either the environment or publicly owned treatment works. The relative complexity of a wastewater treatment system will depend heavily upon the compliance regulations impacting your plant and the composition of your waste stream.

While the contaminants present in a waste stream can vary greatly from one process to the next, wastewater treatment system will depend heavily upon the compliance regulations impacting your plant and the composition of your waste stream.

While the contaminants present in a waste stream can vary greatly from one process to the next, wastewater treatment systems commonly treat for biochemical oxygen demand (BOD), nitrates, phosphates, pathogens, metals, TSS, TDS, and synthetic chemicals.

How they work

While a wastewater treatment train will vary considerably from one installation to the next depending upon discharge regulations, stream constituents, flow reuse strategies, and other factors, these steps represent some of the more common technologies you might expect to see:

Clarification

The first step of wastewater treatment is often clarification, which is a multistep process used to precipitate metals, silica, remove suspended solids from solution. Depending on the characterization of the waste water, clarification can be a series of reaction tanks with chemical addition, coagulation, flocculation, sedimentation, followed by filtration. These steps are usually necessary for removal of any fine particulates and/or by-products, some of which can be recovered if they are of value (such as silver or other materials).

Disinfection

Pathogens—bacteria, viruses, fungi, or any other microorganisms that can be present in wastewater—can lead to all kinds of health issues, including acute sickness, severe digestive problems, or death. When industrial wastewater contains these harmful pathogens, and is released into the environment, it can spread illness and disease, making their removal or neutralization a key aspect of treatment.

Softening

For streams with high hardness or sulfates, a lime softening step may be added to reduce mineral or sulfate content. The process involves the application of lime or lime soda to raise the pH of the stream, which in turn encourages mineral constituents to precipitate out of solution. In some cases, IX or membrane softening may also be used.

Special processes

There are also specialized process steps to treat unique wastewater issues, such as the removal of certain metals or organics or to reduce TDS for recycling, among other examples. Since wastewater streams are typically complex and highly variable from one facility to the next, special processes are often required to fully meet wastewater treatment needs.

Distribution

Following wastewater treatment, the water is routed for reuse within the facility or, complying with local regulations, discharged to the environment or local sewer.

Additionally, because wastewater treatment is almost always subject to fluctuations in composition, flow rate, or effluent requirements, a well-designed system should accommodate such fluctuations and offer options for scalability.

Top wastewater equipment, benefits and ROI

The following list includes the seven most common types of wastewater equipment, how each operates, and how it affects a business’s profitability:

1. Ultrafiltration systems

Ultrafiltration (UF) is a pressure-driven process that uses a membrane to remove emulsified oils, metal hydroxides, emulsions, dispersed material, suspended solids and other large molecular weight materials from wastewater, coolant and other solutions. UF excels at the clarification of solutions containing suspended solids, bacteria and high concentrations of macromolecules, including oil and water.

2. Vacuum evaporation and distillation

Evaporation is a natural phenomenon and a clean separation technology recognized as a best available technique in several wastewater treatment processes. Because it removes the water from the contaminants, rather than filtering the contaminants from the water, it is distinct from other separation processes.

No other technology can attain such high water-recovery and concentration rates as vacuum evaporators, which accelerate the natural evaporation process to treat and distill industrial wastewater amounts from 1 to 120 tons per day. They are capable of achieving residual total solids concentrations of more than 85 percent.

The three primary vacuum evaporators are:

• Heat pumps – Flexible and versatile with low electrical energy consumption and superior reliability
• Hot water/cold water – Reduce operating costs by utilizing existing excess hot water/steam and cooling water
• Mechanical vapor recompression – Engineered for the treatment of large wastewater flow rates with low boiling temperatures for reduced energy consumption

3. Reverse osmosis systems

Reverse osmosis (RO) technology removes dissolved solids and impurities from water by using a semipermeable membrane, which allows the passage of water but leaves the majority of dissolved solids/salts and other contaminants behind. The RO membranes require a greater-than-osmotic pressure and high-pressure water to achieve the desired result. The water that passes through the RO membrane is called the permeate, and the dissolved salts that are rejected by the RO membrane are called the concentrate.

4. Paper bed filters

These types of filters work by gravity and utilize disposable paper media or permanent filter media to produce a positive barrier, which removes solids from all free-flowing industrial process liquids. Paper bed filters are suitable for applications that involve low- to medium-stock removal of ferrous and nonferrous metals, as well as organic and inorganic contaminants such as glass, rubber and plastic. Paper bed filters can extend coolant and tool life by an average of 27 percent, in addition to increasing surface finish quality.

Standard paper bed filtration units are available with or without magnetic separation and can handle flow rates of up to 130 gallons per minute (gpm). Different classes of filter media allow for adjustments of micron clarity. A drum-type model, which can process up to 500 gpm of fluid, occupies one-third the floor space of a paper bed filter.

5. Solid bowl centrifuges

These units optimize centrifugal force (instead of consumable media) to separate solids from liquids in metal processing applications where removal of fines is important for recycle and reuse goals. Process liquid is either pumped or gravity-fed to the centrifuge inlet. Process solids are then centrifugally separated from the liquid phase and collected in an easily removable rotor, also known as a liner. Clarified liquid overflows the rotor into the outer case and is returned by gravity to the process, which minimizes the cost of hauling waste coolants and water away from the facility.

Solid bowl centrifuges provide high-performance liquid/solid separation for all types of particles – metallic and nonmetallic, ferrous and nonferrous – and are available in both manually cleaned rotor style (with a reusable liner) and fully automatic self-cleaning designs.

6. Tramp oil separators

In this water treatment solutions, contaminated fluid flows through a series of baffles and a porous media bed, during which free and mechanically dispersed oils are separated from the fluid. The clarified fluid then flows over the effluent discharge weir back to the reservoir for reuse. The collected oils, inverted emulsions and other waste materials are collected at the top of the separator and automatically discharged into a suitable receptacle. Using gravity flow and coalescence, these separators can reduce tramp oils to less than 1 percent in a single pass while utilizing no consumable products.

Tramp oil separators can also:

• Reduce new fluid purchase costs up to 75 percent (including synthetic and semisynthetic coolants, soluble oils and wash waters)
• Reduce the cost of wash water detergents, heating and disposal
• Reduce hazardous waste volumes up to 90 percent
• Achieve system payback (or ROI) in six months or less